Real time cure monitoring of composite structures using the techniques of mechanical impedence analysis

Abstract

AbstractA dynamic mechanical apparatus, based on the concept of mechanical impedance analysis (MIA), was constructed for real‐time cure monitoring of composites. The frequency response function (FRF), in terms of the inertance, impedance or admittance value, can be obtained from the ratio of the Fourier Transforms of excitation and response signals. Spectra during curing of several different kinds of composite materials were obtained with the Fast Fourier Transform spectrum analyzer while the material was continually excited with a random input generated by an electro‐magnetic shaker. The dynamic properties, such as storage modulus (E′) and loss tangent (tan δ), of the composite can be obtained from the FRF spectra as a function of cure time and temperature. Variations of the inertance spectra with cure time, reflecting the changes in the dynamic mechanical properties, for the composite materials under various isothermal cure conditions are discussed. Optimal cure cycles of a new resin can be determined by characterizing the phase transformation of the material, which can be identified from the MIA measurement results. The MIA technique is found to be a sensitive and direct means for monitoring the overall cure state of composites. The signals obtained can be integrated in real‐time in a closed‐loop feedback control system for composite fabrication.