Abstract
The emission of heavy-duty vehicles has raised great concerns worldwide. The complex working and loading conditions, which may differ a lot from PEMS tests, raised new challenges to the supervision and control of emissions, especially during real-world applications. On-board diagnostics (OBD) technology with data exchange enabled and strengthened the monitoring of emissions from a large number of heavy-duty diesel vehicles. This paper presents an analysis of the OBD data collected from more than 800 city and highway heavy-duty vehicles in China using remote OBD data terminals. Real-world NOx and CO2 emissions of China-6 heavy-duty vehicles have been examined. The results showed that city heavy-duty vehicles had higher NOx emission levels, which was mostly due to longer time of low SCR temperatures below 180°C. The application of novel methods based on 3B-MAW also found that heavy-duty diesel vehicles tended to have high NOx emissions at idle. Also, little difference had been found in work-based CO2 emissions, and this may be due to no major difference were found in occupancies of hot running.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.