Readout hardware and firmware architecture of the HFT PXL detector at STAR

Abstract

The “Heavy Flavor Tracker” (HFT) is an approved micro-vertex detector upgrade to the STAR experiment at RHIC, consisting of three subsystems with various technologies of silicon sensors arranged in 4 concentric cylinders, to be installed in STAR by 2014. This new vertex detector will improve the track-pointing resolution in STAR to a DCA of ~30 μm in order to allow for a direct and full topological reconstruction of heavy quark meson decays and a better determination of the heavy quark meson spectra. The two innermost layers of the HFT close to the beam pipe, the Pixel (“PXL”) subsystem, employ CMOS monolithic active pixel sensor (MAPS) technology that integrates the sensor, front-end electronics, and zero-suppression circuitry in one silicon wafer. The PXL layers of the HFT will consist of 400 MAPS sensors arranged in 40 ladders (10 ladders at a radius of 2.5cm and 30 ladders at 8cm from the beam), each containing 10 of these sensors. This paper will present selected design characteristics of the PXL detector part of the HFT and the hardware and firmware architecture of the proposed readout system for this detector, as well as its integration into the existing STAR framework. A prototype of this readout system has recently been used at CERN to take data from a telescope consisting of 7 sensors arranged in parallel planes and shown to be fully functional.