Abstract
The reactivity worths of synthetic plutonium-uranium clustered fuel elements in a heavy-water-moderated assembly have been experimentally determined using the reactor oscillation method.Several test-fuel compositions have been investigated, representing varying degrees of fucl burnup and burnup distributions; two uranium samples with different U enrichment have been used as standard.The technique selected was aimed to establish “clean” experimental conditions, in order to effectively simplify the analysis of the results. Basically, the technique involved oscillating, according to a square-wave pattern, a 6-m-long fuel element containing a 50-cm-high test section with the fuel composition to be investigated the corresponding neutron density modulation was interpreted in terms of a Fourier analysis.The results of the experiment form a consistent set of data that can be used as test values for refined reactor burnup calculation codes. The overall experimental error, typically ±0.015 pcm (1 pcm = 10-5 Δkeff/keff). is considered remarkably low in view of the massive experimental setup required.A method for the theoretical analysis of the measured reactivity worths is presented. A multigroup perturbation transport calculation in one dimension (S4 approximation) has been developed to account for the radial environmental conditions. The axial effects have been evaluated with a two-dimensional transport calculation. The group cross-section data used in the analysis were basically taken from the GAM-II and GATHER-II libraries.Using the same basic one-dimensional code with an appropriately adjusted input parameter, infinite lattice multiplication factors have also been calculated from he experimental reactivity results. These results are compared to the values of k∞ obtained from null-reactivity measurements of identical clusters which were performed in association with the Comitato Nazionale Energia Nucleare, Italy, in RB-1 Reactor in Bologna. The agreement between the two sets of results is satisfactory.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.