Reactive Powder Concrete Microstructure and Particle Packing.

Abstract

The subject of this study is the dispersed composition of multicomponent cement systems. This study aims to reduce interparticle voids, increasing the strength and concentration of the solid phase. The investigated concrete mixture contained two fine aggregate fractions, granite-gabbro crushed stone of 5–10 mm fraction, Portland cement of CEM I 42.5N class, finely dispersed granular blast furnace slag, microsilica, highly dispersed cement fraction, superplasticizer Glenium 430, and high-valence hardening accelerator. A laser analyzer determined the shape and size of dispersed particles of the components. The structure of the cement stone was studied by scanning microscopy, thermographic, and X-ray phase analysis methods. The strength of concrete with an optimized dispersed composition at the age of 2 days was 52, 63, and 74 MPa, while that at the age of 28 days was 128, 137, and 163 MPa. For this concrete, the consumption of multicomponent cement was 650, 700, and 750 kg/m3, respectively. The high efficiency of the application of bimodal clinker component and granulated blast-furnace slag is shown. It is established that the optimal content of nanoscale additives, including microsilica, should be insignificant and determined experimentally.