Abstract
The rates of chlorination of zinc, copper and iron at 800°C in air and chlorine mixtures were measured by thermogravimetric analysis. Scanning electron microscopy, atomic absorption spectroscopy and X-ray diffraction were used to examine and characterise the reaction products. From the results obtained at 800°C, it appears that the chlorination of zinc in air/chlorine gaseous mixture (10:1) is characterised by both mass transfer and chemical reaction control. In the case of the chlorination of copper, the activation energy was very low. For iron, it was found that there was a modest increase in weight in both air and air/chlorine mixtures due to oxidation but very little loss due to chlorination.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.