Abstract
Extraction with N-methyl-2-pyrrolidone (NMP) via the three-stage mixer–settler operation was studied as possible process for re-refining of waste mineral insulating oil. The following extraction process parameters were investigated systematically in order to determine their optimum values: amount of water as co-solvent in NMP, extraction temperature and solvent/oil ratio. The process parameters and resulting oil chemical compositions were found to influence the electrical properties and the oxidation stability of the re-refined oil. The levels of aromatic, paraffinic and polycyclic aromatic hydrocarbons were determined using IR spectroscopy and HPLC, while other relevant chemical and electrical properties of waste and re-refined oil were determined according to IEC, ISO and ASTM standards. Extraction using NMP was found to be an adequate method for waste mineral insulating oil re-refining, according to the application properties of the re-refined oil. Moderate extraction temperature, 1% water in NMP and a low solvent/oil ratio (0.5) were determined to be the optimum process parameters.
Sign-in/Register to access full text options 
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
