Abstract
AbstractThermoregulatory garments composed of liquid‐cooled plastic tubes have users ranging from astronauts to multiple sclerosis patients and are emerging as a flexible cooling solution for wearable electronics and high‐power robotics. Despite the plethora of applications, the current cooling systems are cumbersome to use due to their excessive size. In this work this issue is resolved by developing soft, thermally conductive silicone–aluminum composite tubes. To achieve optimal device performance, the material must be designed to balance the decrease in bulk thermal resistance and the increase in interfacial tube‐substrate resistance due to composite stiffening. Thus, to enable the rational design of such tubes, a closed form thermomechanical model that predicts cooling performance as a function of tube geometry and filler fraction is developed and experimentally validated. Predictions via this model and experiments are used to reveal how the tube's geometrical and material design can be adjusted to minimize the required length of tubing and maximize the heat extracted from a metallic surface and skin. Lastly, through a holistic analysis, this work demonstrates that besides significantly increasing overall cooling capability, the use of low‐resistance tubing can provide a multifold reduction in the cooling system size and enable novel operating modes.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.