Rate Capability of Large-Area Triple-GEM Detectors and New Foil Design for the Innermost Station, ME0, of the CMS Endcap Muon System

Abstract

To extend the acceptance of the CMS muon spectrometer to the region 2.4< |η| <2.8, stacks of triple-GEM chambers, forming the ME0 station, are planned for the CMS Phase 2 Upgrade. These large-area micro-pattern gaseous detectors must operate in a challenging environment with expected background particle fluxes up to 150 kHz/cm <sup xmlns:mml="http://www.w3.org/1998/Math/MathML" xmlns:xlink="http://www.w3.org/1999/xlink">2</sup> . Unlike traditional non-resistive gaseous detectors, the rate capability of such triple-GEM detectors is limited not by space charge effects, but by voltage drops on the chamber electrodes due to avalanche-induced currents flowing through the resistive protection circuits (introduced as discharge quenchers). We present a study of the irradiation of large-area triple-GEM detectors with moderate fluxes to obtain a high integrated hit rate. The results show drops as high as 40% of the nominal detector gas gain, which would result in severe loss of tracking efficiency. We discuss possible mitigation strategies leading to a new design for the GEM foils with electrode segmentation in the radial direction, instead of the 'traditional" transverse segmentation. The advantages of the new design include uniform hit rate across different sectors, minimization of gain-loss without the need for voltage compensation, and independence of detector gain on background flux shape.