Abstract
This study was designed to prepare an adsorbent without any complex modification process for the removal of atrazine (AZN) from aqueous phase. Thus, Mobil composition of matter No. 41 (MCM-41) was synthesized and modified by physical activation at high temperature (650 °C). The synthesized adsorbent was tested by XRD, SEM, EDX, FT-IR and BET to confirm the successful synthesis as well as effectiveness for the adsorption of AZN. The average particle size of prepared material was found to be about 500 nm, while the BET calculations showed that adsorbent was porous with a specific surface area of 25.9 m2/g. Later, it was used in batch removal studies of AZN for which, it showed a high adsorption capacity of 89.99 (mg/g). The pH of 6, temperature of 313 K was found to be the optimized conditions for the maximum removal of AZN. Of the four kinetic models studied, the pseudo-first-order yielded a superior fit in comparison with the other three models. The results indicated that the five linearized adsorption equilibrium isotherm models (Langmuir, Freundlich, Dubinin-Radushkevich, Temkin and Harkins-Jura models) closely correlate the AZN adsorption removal process with Pearson correlation coefficient (R2) values of 0.9955, 0.8551, 0.8736, 0.8913 and 0.7253, respectively. The energy functions obtained by thermodynamic analysis suggested that the AZN sorption follows a non-spontaneous and endothermic path.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.