Abstract
Novel packed-capillary columns for gas chromatography were developed with a thin-wall stainless-steel capillary of 1.0 mm i.d.; and rapid temperature-programmed separations have been carried out after a basic evaluation concerning the compatibility of these columns to the temperature program. With a numerical integration method, the retention of several test analytes during temperature-programmed elution was successfully estimated. In order to confirm the suitability of the packed-capillary columns to relatively fast temperature programming up to 40 degrees C/min, theoretically predicted retention data were compared with that actually measured. The results suggested a good separation performance of the newly developed packed-capillary columns as a particle-packed column conventionally used. Also, the compatibility to a rapid temperature-programmed operation was quite satisfactory for almost all of the separations currently done in typical analytical laboratories.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.