Abstract

A combined granular activated carbon (GAC) adsorption and microwave (MW)/persulfate (PS) regeneration process was employed to treat sulfanilic acid (SA) wastewater. SA of 50mgL−1 was used. Results indicate that GAC effectively removed SA within 8h. Microwave irradiation under acidic condition (pH 2.8) did not effectively regenerate GAC within 60s. In contrast, the MW/PS process rapidly regenerated GAC within 30s. An increase in PS dose, GAC/solution ratio, and irradiation time enhanced the regeneration. The optimum operating conditions were initial solution pH (pH0) 6, PS of 8×10−3M, and GAC/solution of 3g/15ml. The adsorption capacity and BET of GAC did not significantly decrease at the first seven cycles of adsorption/regeneration. The desorption solution did not contain observable SA concentration.The addition of t-butanol inhibited GAC regeneration by the MW/PS process. When SA solution was treated by MW/PS, the SA and PS did not decrease within 60s. In the presence of GAC, PS decreased rapidly by MW and 80% of PS decayed within 30s. The results suggest that degradation of the sorbed SA by generated free radicals was one of the important factors responsible for the rapid GAC regeneration by the MW/PS process.

Full Text
Published version (Free)

Talk to us

Join us for a 30 min session where you can share your feedback and ask us any queries you have

Schedule a call