Abstract
Various tiny plastic particles were retrieved from the sea and studied using scanning electron microscopy/energy-dispersive X-ray spectroscopy (SEM/EDX) analysis to prepare realistic reference microplastics (MP). Most of the MP exhibited a diameter of < 20 × 10−6 m and 0.1–0.2 molar ratios of oxygen to carbon atoms (O/C), indicating that they primarily comprised polyethylene (PE), polypropylene (PP), and polystyrene (PS). It took a long time to reproduce such O/C ratios in standard laboratory weathering methods. For example, degrading of 30 × 30 × 0.060 mm PP film required 75 days for the 0.1 ratio, even with an advanced oxidation process (AOP) using a sulfate radical anion (SO4·−) initiator in distilled water at 65 °C. However, seawater drastically improved the PP degradation performance of AOP under a weak acid condition to achieve the 0.1 ratio of PP film in only 15 days. The combination of seawater and the SO4·− initiator accelerated the degradation process and showed that the MP’s size could be controlled according to the degradation time.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.