Abstract
In-situ sampling techniques used to characterize the stratigraphy and extent of subsurface contamination are becoming increasingly common in environmental site investigations. Laser Induced Fluorescence (LIF) combined with Cone Penetrometer Testing (CPT) is a new in-situ technology that provides real-time data on the extent to Aromatic Petroleum Hydrocarbons and stratigraphy in the subsurface. Integrated LIF/CPT data can rapidly provide contaminant and geologic information necessary to define plume boundaries and design efficient and effective remediation plans. The Rapid Optical Screening Tool (ROST{trademark}, a trademark of the Loral Corporation) combines state-of-the-art LIF technology in conjunction with CPT equipment. The combined ROST{trademark}/CPT system provides a two centimeter resolution which quickly and accurately delineates the vertical and horizontal extent of petroleum contamination. The system distinguishes between specific fuel types by obtaining wavelength-time matrices, which are three-dimensional representations of the fluorescence data. By performing the test in-situ, the combined system eliminates cuttings disposal and the cost and time of extensive laboratory analysis associated with other subsurface screening techniques. The ROST{trademark}/CPT system was used at a former refinery to investigate the extent of petroleum hydrocarbons in the subsurface. The ROST{trademark}/CPT tool was hydraulically advanced to an average depth of 30 feet below grade at 150 grid locationsmore » in two separate areas. The results provided a clear real-time characterization of the vertical and horizontal extent of three separate plumes and the potential contamination migration pathways. Due to the rapid, continuous subsurface characterization, on-site decision making enabled a 50% reduction in the planned scope of work and significantly reduced the investigation costs to the client.« less
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have