Abstract
Solid-state lasers with pulse duration of 10 ps and radiation wavelength of 1064 nm were used to investigate the laser ablation efficiency dependence on processing parameters: laser fluence (pulse energy and beam spot size), beam scanning speed, pulse repetition rate, and scanned line (hatch) distance for the copper sample. Utilising a 40 W power laser, the highest ablation efficiency of 2.5 µm3/µJ and the ablation rate of 100 µm3/µs with the smallest surface roughness of 0.2 µm was obtained. Three-dimensional (3D) fabrication using a galvanometer scanner and layer-by-layer removal technique with optimal parameters defined for efficient ablation were demonstrated at a rate of 6 mm3/min. Combination of high material removal rate with excellent quality and complex 3D structure formation is in a high interest for mimicking bio-inspired surfaces, micro-mould fabrication and decorative applications.
Sign-in/Register to access full text options 
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
