Abstract
A simple direct method for the rapid fabrication of zinc oxide nanotube-nanowire hybrid structure in an environmentally friendly way is described here. Zinc foils were anodized in an aqueous solution of washing soda and baking soda at room temperature in order to obtain the hybrid architecture. At the beginning of the process nanowires were formed on the substrate. The wider nanowires transformed into nanotubes in about a minute and grew in length with time. The morphological integrity was maintained upon heat treatment at temperatures up to the melting point of the substrate (∼400 °C) except that the nanotube wall became porous. The chemiresistor devices fabricated using the heat-treated structure exhibited high response to low-concentration volatile organic compounds that are considered markers for breast cancer. The response was not significantly affected by high humidity or presence of hydrogen, methane, or carbon dioxide. The devices are expected to find use as breath sensors for noninvasive early detection of breast cancer.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
