Rapid green microwave assisted extraction of lutein from Chlorella sorokiniana (NIOT-2) – Process optimization

Abstract

Chloropycean microalgae are looked up as a prospective alternate source for the production of xanthophyll carotenoid lutein. Despite, the market significance and multitude of nutraceutical applications of lutein commercial production from microalgae still remains a challenge due to the prohibitive downstream cost. This necessitates innovative less energy intensive, high lutein yielding green processes. The present work presents a comprehensive study on the rapid green microwave assisted extraction (MAE) of lutein from marine chlorophycean microalgae Chlorella sorokiniana (NIOT-2). The process parameters of microwave assisted alkali pre-treatment like exposure time (ET), alkali concentration (AC) and solid (biomass): liquid (aqueous Potassium hydroxide-KOH) ratio (S: L ratio) were optimized using single factor and response surface method (RSM) experiments. The optimized conditions for microwave assisted alkali pre-treatment (ET:1.47 min; AC: 8.16 M KOH and S:L ratio of 36.8:1 (mg/mL) augmented the lutein yield (20.69 ± 1.2 mg/g) 3.26 fold when compared to conventional extraction (6.35 ± 0.44 mg/g). Lutein extracted using optimized MAE conditions was purified and characterized. Visualization of the MAE extracted algal biomass using Scanning electron microscope confirmed the effective cell disruption. X-ray diffraction (XRD) analysis of microwave assisted alkali treated biomass (83.85%) revealed a significantly higher crystallinity index when compared to untreated control (17.28%). MAE pre-treatment can thus be propounded as a suitable process for lutein extraction from marine microalgae due to its amalgamated rapidity, homogenous heating, less energy intensiveness and high extraction yield.