Abstract

AbstractA method is described for rapid determination of erucic acid in low erucic rapeseed. The method is suited primarily to erucic acid levels below 1 % and so provides greater sensitivity and accuracy than other procedures adapted to this range. Oil is expressed by means of rollers and the fatty acids are routinely transmethylated before gas‐liquid chromatographic separation isothermally at 215°C. For maximum speed and accuracy the methyl ester of tricosanoic acid (C23:0) is included as internal standard. It elutes after erucic acid (C22:1) and within 15 min of injection. Satisfactory resolution of behenic (C22:0) and erucic acids is achieved, with good separation from other fatty acids and from the internal standard, on a steady baseline. Using one column repeatedly or two columns alternately, approximately 30 samples can be analysed in 1 day. With dual integrators the sample output can be doubled. Within the range below 1 % erucic acid, oils of high (0.9% m/m) and low (0.2% m/m) content returned coefficients of variation (c.v.) of ± 1.1 % and ± 2.5%, respectively. When rapeseed sample variation was included, precision fell away and c.v. changed to ± 7% and ± 12%, respectively. Sample variation is examined briefly and suggestions are made to reduce this source of error.

Full Text
Paper version not known

Talk to us

Join us for a 30 min session where you can share your feedback and ask us any queries you have

Schedule a call

Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.