Abstract

A rapid and simple method for the fabrication of the island patterns with particles and cells was applied to detect the presence of specific antigens on the cell surface. An upper interdigitated microband array (IDA) electrode was mounted on a lower substrate with the same design to fabricate a microfluidic-channel device for dielectrophoretic manipulation. The electrode grid structure was fabricated by rotating the upper template IDA by 90° relative to the lower IDA. A suspension of anti-CD33 modified particles and HL-60 cells was introduced into the channel. An AC electrical signal (typically 20V peak-to-peak, 100kHz) was then applied to the bands of the upper and lower IDAs, resulting in the formation of island patterns at the intersections with low electric fields. Immunoreactions between the antibodies immobilized on the accumulated particles and the CD33 present on the surface of the cells led to the formation of complexes comprising corresponding antigen-antibody pairs. Non-specific pairs accumulated at the intersection, which did not form complexes, were then dispersed after removal of the applied field. The time required for the detection of the formation/dispersion of the complexes is as short as 6min in the present procedure. Furthermore, this novel cell binding assay does not require pretreatment such as target labeling or washing of the unbound cells.

Full Text
Paper version not known

Talk to us

Join us for a 30 min session where you can share your feedback and ask us any queries you have

Schedule a call

Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.