Rapid esterification of fatty acid using dicationic acidic ionic liquid catalyst via ultrasonic-assisted method.

Abstract

Biodiesel production via esterification/transesterification reactions can be catalyzed by homogenous or heterogeneous catalysts. Development of heterogeneous catalysts for biodiesel production is highly advantageous due to the ease of product purification and of catalyst recyclability. In this current work, a novel acidic [DABCODBS][CF3SO3]2 dicationic ionic liquid (DIL) was used as heterogeneous catalyst to produce biodiesel using oleic acid as model oil. The esterification was conducted under ultrasonic irradiation (20 kHz) using a 14 mm ultrasonic horn transducer operated at various duty cycles. It was observed that the duty cycle, amplitude, methanol to oil molar ratio, catalyst amount and reaction temperature were the major factors that greatly impact the necessary reaction time to lead to a high yield of biodiesel. The reaction conditions were optimized with the aid of Response Surface Methodology (RSM) designed according to the Quadratic model of the Box Behnken method. The optimum conditions were found to be at catalyst amount of 0.64 mol%, methanol to oil ratio of 14.3:1, temperature of 59 °C, reaction time of 83 min and amplitude of 60% in continuous mode. The results showed that the oleic acid was successfully converted into esters with conversion value of 93.20% together with significant reduction of reaction time from 7 h (using mechanical stirring) to 83 min (using ultrasonication). The results also showed that the acidic DIL catalyst we designed purposely was efficient to catalyze the ultrasonic-assisted esterification yielding high conversion of oleic acid to methyl oleate on short times. The DIL was also recycled and reused for at least five times without significant reduction in performance. Overall, the procedureoffersadvantages including short reaction time, good yield, operational simplicity and environmentally benign characteristics.