Abstract
In this work, the tin-bismuth alloy electrode (SnBiE) was used for U(VI) concentration determination for the first time. Compared to the conventional solid electrode (glassy carbon electrode and bismuth bulk electrode), the SnBiE possesses a higher hydrogen overpotential, which indicates that the tin-bismuth alloy can considerably extend the application of potentially available electrode detection systems. Combining with electrochemical behavior analysis and spectrometric measurements as well as theoretical calculation methods, the geometric structures of uranium-cupferron (N-nitrosophenylhydroxylamine) complexes have been revealed and a more detailed electrode mechanism has been proposed. The electroanalysis results show that the optimal sensitivity could be obtained by using diphenylguanidine as the auxiliary reagent. The calibration plot for U(VI) quantification was linear from 0.5nM to 30nM with a correlation coefficient of 0.999. In the meanwhile, a detection limit of 0.24nM was obtained in connection with an accumulation time of 30 s, which is comparable with that of mercury analogues. The practical applications of SnBiE have been tentatively performed for the determination of UO22+ in real water samples and the results were well consistent with those by Inductively Coupled Plasma-Mass Spectrometry (ICP-MS). A very simple, convenient and cheap approach was established for the determination of UO22+ in natural water samples containing surfactants without the otherwise necessity of sample pretreatment, which drastically reduce the analysis time.
Published Version
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
