Rapid determination of oligomeric hindered amine light stabilizers in polymeric materials.

Abstract

Hindered amine light stabilizers are essential for the stabilization of synthetic polymers, particularly for materials used for outdoor applications. Although up to now a considerable number of studies dealing with the analytics of this class of stabilizers had been published, especially the determination of oligomeric hindered amine light stabilizers is still an analytical challenge. In the current work, a fast and simple liquid chromatographic method for the quantitative determination of oligomeric hindered amine light stabilizers is presented. A key aspect of this method is their completely different retention behavior depending on the pH, enabling a single peak elution approach by a pH gradient run. This allows a quantitation with simple UV detection independent of the actual oligomeric composition. Calibration curves within the concentration range relevant for the analysis of real polymer samples (LOQ=70mg/L) were constructed with R2 values above 0.99. Spiked extracts from polyolefin samples showed recovery rates between 97.3 and 102.9% for five different commercial hindered amine light stabilizers. Relative standard deviations were between 2.0 and 3.9%. Furthermore, it was demonstrated that the employed approach can be easily adapted for mass spectrometry detection.