Rapid Determination of Free Fatty Acids in Poultry Feed Lipid Extracts by SB-ATR FTIR Spectroscopy

Abstract

A simple, rapid, and reproducible method has been developed for the quantitative determination of free fatty acid (FFA) content in lipids extracted from poultry feeds by Fourier transform infrared (FTIR) spectroscopy with the use of a single-bounce attenuated total reflectance (SB-ATR) accessory. An FTIR calibration curve was prepared by gravimetrically adding oleic acid (15-37%) to pure refined, bleached, and deodorized (RBD) canola oil and measuring the area of the COOH absorption band at 1710 cm-1. The oil from each of 12 poultry feed formulations was extracted using conventional Soxhlet extraction, and after evaporation of the solvent, the FFA content was determined by the conventional AOCS titrimetric procedure and by the SB-ATR/FTIR method. The SB-ATR/FTIR FFA predictions were related to those determined by the AOCS titrimetric method by linear regression, producing an R value of 0.999 and a SD of +/-0.28% FFA. Time-course spectra collected as lipids extracted into hexane indicated that a 15 min extraction was adequate to obtain a representative sample for FFA determination, with further extraction resulting in little, if any, change in the proportion of FFA in the lipid extract. Only a small volume of the hexane extract ( approximately 20 mL) yielded sufficient material for the SB-ATR/FTIR analysis. Thus, by shortening the extraction time and taking a small sample so as to reduce solvent removal time, the SB-ATR/FTIR procedure provides a very simple and rapid means of determining the FFA content of poultry feed lipids.