Rapid Detection of Uropathogens Using an Integrated Multiplex Digital Nucleic Acid Detection Assay Powered by a Digital-to-Droplet Microfluidic Device.

Abstract

The digital nucleic acid detection assay features the capability of absolute quantitation without the need for calibration, thereby facilitating the rapid identification of pathogens. Although several integrated digital nucleic acid detection techniques have been developed, there are still constraints in terms of automation and analysis throughput. To tackle these challenges, this study presents a digital-to-droplet microfluidic device comprising a digital microfluidics (DMF) module at the bottom and a droplet microfluidics module at the top. Following sample introduction, the extraction of nucleic acid and the dispensation of nucleic acid elution for mixing with the multiple amplification reagents are carried out in the DMF module. Subsequently, the reaction droplets are transported to the sample inlet of the droplet microfluidic module via a liquid outlet, and then droplet generation in four parallel units within the droplet microfluidics module is actuated by negative pressure generated by a syringe vacuum. The digital-to-droplet microfluidic device was employed to execute an integrated multiplex digital droplet nucleic acid detection assay (imDDNA) incorporating loop-mediated isothermal amplification (LAMP). This assay was specifically designed to enable simultaneous detection of four uropathogens, namely, Escherichia coli, Pseudomonas aeruginosa, Klebsiella pneumoniae, and Enterococcus faecalis. The entire process of the imDDNA is completed within 75 min, with a detection range spanning 5 orders of magnitude (9.43 × 10-2.86 × 104 copies μL-1). The imDDNA was employed for the detection of batched clinical specimens, showing a consistency of 91.1% when compared with that of the conventional method. The imDDNA exhibits simplicity in operation and accuracy in quantification, thus offering potential advantages in achieving rapid pathogen detection.