Abstract
The results of experimental and computational studies are considered on a near surface electric discharge effect on supersonic airflow near a 15° compression surface. The tests were performed at Mach number M = 2, stagnation pressure P0 = 1–2.8 bar, stagnation temperature T0 = 290–600 K, and plasma power Wpl = 6–12 kW. They demonstrated a significant effect of plasma on the flow structure and reduction of static pressure on the compression surface. Transient phenomena were analyzed and it was found that the pressure decrease on the ramp was as fast as t < 0.3 ms. Simulations based on 3D unsteady Navier–Stokes equations with plasma modeled as an array of lengthwise heat sources demonstrated adequacy of such simplifications. Further simulations attempted to find an optimal range of plasma power and position in terms of achievable effect, effectiveness of the method, and response time of the system to the plasma actuation. The electric discharge authority for a fast and effective control of aerodynamic forces in a compression ramp configuration is considered.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.