Year-end Sale % OFF 
Abstract
Hierarchically porous activated Starbons® derived from starch are found to make excellent adsorbents for methylene blue, even in the presence of other dyes and inorganic salts, highlighting their potential to be used in water purification. The optimal material (S950C90) has a methylene blue adsorption capacity (891 mg g-1) almost nine times higher than that of unactivated S800 and four times higher than that of commercial activated carbon at 298 K. The adsorption of methylene blue onto optimal materials (S950C90 and S800K4) reaches equilibrium within 5 min. Adsorption data for all the adsorbents show a good fit to the Freundlich isotherm which allows the Gibbs free energies of adsorption to be calculated. The adsorption capacities increase as the pH of the methylene blue solution increases, allowing the dye to be desorbed by treatment with acidic ethanol and the Starbon® materials reused. Porosimetry and SEM-EDX imaging indicate that methylene blue adsorbs throughout the surface and completely fills all the micropores in the Starbon® adsorbent. The methylene blue adsorption capacities show excellent correlations with both the BET surface areas and the micropore volumes of the materials.
Published Version
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
