Rapid Analysis of Single Droplets of Lanthanide–Ligand Solutions by Electrospray Ionization Mass Spectrometry Using an Induction-Based Fluidics Source

Abstract

Electrospray ionization mass spectra of lanthanide coordination complexes were measured by launching nanoliter-sized droplets directly into the aperture of an electrospray ionization mass spectrometer. Droplets ranged in size from 102 nL to 17 nL, while metal concentrations were 293 μM. The sample solution was delivered to a source capillary by a nanoliter dispenser at a rate of 21 nL/s, and droplets were ejected from the capillary by pulsing a potential onto the capillary. The end of the capillary was situated in front of the mass spectrometer and aimed directly at the aperture. The period and power of the electrical pulse was controlled by a digital energy source. The intensity of the extracted ion time profiles from the experiment showed reproducible production of lanthanide nitrato-anion complexes (Ce, Tb, and Lu). The integrated ion intensities of the complexes were reproducible, having relative standard deviations on the order 10% for anions, and 10-30% for cations. The integrated ion intensities were proportional to the droplet size, and the response was linear from about 100 to 650 pmol. However, the intercept is not zero, indicating a nonlinear response at lower analyte quantities or droplet sizes. Cation complexes were generated in separate experiments that corresponded to lanthanide nitrate ion pairs coordinated with the separations ligand octyl,phenyl,(N,N-diisobutylcarbamoyl)methylphosphine oxide (CMPO). Experiments showed a preference for formation of CMPO complexes with Ln(3+) having larger ionic radii. The relative standard deviation values of the cation abundance measurements were somewhat higher for the more highly coordinated complexes, which are also less stable. The mass spectral quality was high enough to measure the ratios of the minor isotopic ions to a high degree of accuracy. The approach suggests that the methodology has utility for analysis of solutions where the sample quantity is limited, or where the sampling efficiency of a normal ESI source is limiting on account of hazards derived from the sample solution.