Ranking of vitrified grinding wheel parameters by using analytical hierarchical process (AHP) for surface roughness of work piece in grinding operation

Abstract

Objective of grinding process is to generate high quality surface finish on work piece. There are many parameters which influence on the work piece roughness. Work piece material and characteristics, grinding wheel specification, grinding conditions and dressing conditions influence on the surface quality of the work piece. Selection of grinding wheel is important aspect for producing good quality of surface finish on the work piece. The main components of grinding wheel are the abrasive grains, bond material and porosity. Selection of correct grinding wheel is necessary for generating better surface finish on the work piece. Analytical Hierarchical Process (AHP) is used for ranking of vitrified bond grinding wheel parameters on surface roughness on the work piece in sub sequent grinding operation. The grit, grade, (Hardness of wheel) structure and type of abrasive are critically assisted in terms of the surface finish produced on work piece in the subsequent grinding operation. Analytic Hierarchy Process (AHP) shows that the abrasive grit of grinding wheel has first rank and grade (hardness) of the wheel has Second rank for the producing surface finish on the work piece after grinding operation. Structure and type of abrasive of wheel have a third and fourth rank respectively. Thus, AHP gives qualitative way of controlling work piece surface roughness in sub-sequent grinding operation by selecting proper grinding wheel of vitrified bond which helps the user to select the correct grinding wheel.