Abstract

The SHAllow RADar (SHARAD) is a subsurface sounding radar provided by the Italian Space Agency (ASI) as a facility instrument for NASA's Mars Reconnaissance Orbiter (MRO) mission, the second longest-lived mission to orbit Mars after Mars Odyssey. Developed by an Italian-US Team, SHARAD was designed to investigate to depth of up to one kilometer in the Martian subsurface and to map dielectric discontinuities associated with compositional and/or structural changes. The radar mapping began in November 2006 and, after 16 years of operations, SHARAD has mapped most of the planet's surface (∼55%), contributing a data volume for the entire MRO mission that exceeds that of all the past Mars missions combined.Designed to complement the lower-frequency, relatively narrower bandwidth capability of the MARSIS sounding radar, SHARAD emits an 85μs, frequency-modulated (10 MHz) chirp at a central frequency of 20 MHz to increase the signal-to-noise ratio (SNR) and achieve a finer resolution compared to MARSIS. On the ground, echoes recorded by the radar are range compressed using conventional pulse compression techniques yielding a nominal range resolution of 15 m (vacuum, 5–8 m in typical Martian materials). Additionally, synthetic aperture processing is performed in along-track to increase the resolution up to 300–500 m.Throughout the entire mission duration, SHARAD provided a diverse and extensive range of imaging data. It was able to observe the internal structures of Planum Boreum and Planum Australe, two icy deposits that contain the North and South Polar Layered Deposits (NPLD-SPLD), thought to contain valuable information about the planet's past climate. The radar unveiled the massive deposits of buried CO2 ice below the southern residual ice cap (SRIC), which confirmed the influence of the planet obliquity and insolation in the accumulation of dry ice. Furthermore, it revealed the intricate lava flows structures in the Tharsis Volcanic region, suggesting that the planet experienced deposition by multiple volcanic episodes.However, radar resolution often poses a limitation for subsurface investigations in many regions. Only recently, processing techniques have focused on enhancing SHARAD radargrams vertical resolution by implementing the Bandwidth Extrapolation (BWE) technique. This approach has demonstrated an improvement of the vertical resolution while preserving the time-of-arrival (TOA) and amplitude of the detected echoes. The resulting super-resolved data products exhibit better separation between radar returns, thus improving the overall understanding of the investigated terrains. The obtained results demonstrate the value of implementing the BWE techniques in the data processing pipeline whenever radar sounders are involved.

Full Text
Published version (Free)

Talk to us

Join us for a 30 min session where you can share your feedback and ask us any queries you have

Schedule a call