Abstract

A random narrow-linewidth lasing at a wavelength of 976 nm was obtained in an ytterbium-doped germanophosphosilicate fiber with an array of weakly reflecting fiber Bragg gratings (FBGs). A random laser cavity was formed by implementing the standard phase mask method of FBG inscription directly during the fiber drawing process. The UV radiation pulses of a KrF excimer laser (248 nm wavelength) synchronized with the fiber drawing speed were used to fabricate the in-fiber array of hundreds of similar FBGs. The developed laser’s slope efficiency in the backward-pumping scheme was measured as high as 33%. The stable continuous-wave operation mode of the laser was detected. The magnitude of the laser power fluctuations depends linearly on the cavity length. The random laser cavity modified with a single highlyreflected (90%) FBG demonstrates significantly better power stability and higher slope efficiency than the same one without an FBG.

Full Text
Published version (Free)

Talk to us

Join us for a 30 min session where you can share your feedback and ask us any queries you have

Schedule a call