Abstract
The response of the train–bridge system has an obvious random behavior. A high traffic density and a long maintenance period of a track will result in a substantial increase in the number of trains running on a bridge, and there is small likelihood that the maximum responses of the train and bridge happen in the total maintenance period of the track. Firstly, the coupling model of train–bridge systems is reviewed. Then, an ensemble method is presented, which can estimate the small probabilities of a dynamic system with stochastic excitations. The main idea of the ensemble method is to use the NARX (nonlinear autoregressive with exogenous input) model to replace the physical model and apply subset simulation with splitting to obtain the extreme distribution. Finally, the efficiency of the suggested method is compared with the direct Monte Carlo simulation method, and the probability exceedance of train responses under the vertical track irregularity is discussed. The results show that when the small probability of train responses under vertical track irregularity is estimated, the ensemble method can reduce both the calculation time of a single sample and the required number of samples.
Highlights
With the development of high-speed railways, many highspeed railway bridges have been used to replace the subgrade
The results show that when the small probability of train responses under vertical track irregularity is estimated, the ensemble method can reduce both the calculation time of a single sample and the required number of samples
The Monte Carlo simulation (MCS) method has been applied to reliability analysis of the train–bridge systems [10], and the stochastic characteristics of coupling systems have been explored in a way of the multi-sample calculation [11]
Summary
With the development of high-speed railways, many highspeed railway bridges have been used to replace the subgrade. To analyze the reliability of moving trains on a bridge under stochastic excitations, random vibration methods, such as the pseudo-excitation method [5, 6], spectral approach [7, 8], and probability density evolution method [9] have been applied in the stochastic analysis of train–bridge systems. The subset simulation (SS) method [13], a controlled MCS method, can reduce the sample number to estimate small probabilities. When the SS/S method is applied to estimate the extreme distribution of train–bridge systems, if the exceedance probability is 1.0 9 10-4, the number of samples is approximately 104, which means that the calculations take a lot of time [16].
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.