Abstract

Fresnel reflection losses have been reduced by the fabrication of random nanostructures on optical component surfaces, acting as an antireflective treatment. These structures have shown a broadband enhancement over a wide range of angle-of-incidence and polarization insensitivity. The random nanostructures were fabricated on pre-existing, near-wavelength period, fused silica binary gratings, with periods of 1.595 and 1.166 μm, respectively. The diffractive properties and the efficiency were measured and compared prior and postimplementation of the random nanostructures. The postprocessed gratings retained the diffractive properties of the original gratings, such as the propagating diffraction order angles, period, and the fill factor. A selectable multiwavelength He–Ne laser working at 594, 612, and 633 nm was used to test the gratings for both incident polarizations, S (TE) and P (TM). The data were collected at normal and Bragg incidence. The Fresnel reflection was suppressed by a factor of 10 postprocessing, resulting in a reflected intensity of 0.5% to 1.0% for 1.595-μm period grating and around 0.5% to 4% for 1.166-μm period grating. A 10% enhancement was observed for the combined transmission diffraction efficiency at S polarization for the 1.166-μm grating. Beam profiles of the diffracted light show no adverse changes due to the random nanostructuring on both the gratings. The results indicate that random nanostructures can be an antireflective treatment for pre-existing binary gratings, without adverse effects on the grating diffractive properties and beam profiles.

Full Text
Published version (Free)

Talk to us

Join us for a 30 min session where you can share your feedback and ask us any queries you have

Schedule a call