Abstract
Raman spectroscopy and sheet resistance measurements were used to study the preparation processes of low-resistance p-type 4H-SiC by Al ion implantation with ion doses of 2.45×1012 - 9.0×1014 cm-2 and annealing treatment with temperatures of 1700 - 1900 °C. Greatly different from the LOPC (longitudinal optical phonon-plasmon coupled) Raman mode found from the sample of doping 4H-SiC during epitaxial growth, no significant influence on the surface concentration could be found for the longitudinal optical (LO) mode of Al-implanted 4H-SiC samples. When the Al surface concentration is larger than around 1018 cm-3, it was found that the intensity of the LO+ Raman peak (~ 980 - 1000 cm-1) increases and its full width at half maximum (FWHM) drops with the increase of surface concentration after annealing treatment. Moreover, for surface concentrations above 1018 cm-3, the LO+ Raman peak showed a left shift towards the LO peak, which could be related to the increase of free carrier concentration in the Al-implanted 4H-SiC samples. After higher annealing temperatures of 1800 °C and 1900 °C, the crystallinity of Al-implanted 4H-SiC was found to be improved compared to annealing at 1700 °C for surface concentrations larger than 1018 cm-3, which is consistent with the results of sheet resistance measurements.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
