Raman distributed temperature sensing for end winding of high‐power generator

Abstract

The temperature on the busbars of electric generators in the end-winding region needs to be monitored continuously. High temperature is associated with curvatures, seams, and poor ventilation. However, this solution has limitations, such as the number of measurement points. This article presents a reconstruction algorithm to estimate high-resolution signals, from readings of a distributed temperature system for monitoring high-power generator bars. The purpose of this work is to measure the temperature in the end-winding region with optical sensors based on Raman distributed temperature sensing (RDTS). The ability of RDTS equipment to perform a measurement is limited by its spatial resolution of 1 m. The proposed algorithm reduces spatial resolution through signal processing without changing the equipment hardware. Through the experimental results, it was possible to perform accurate temperature measurements for lengths up to 15 cm using the sensor element. With this method, the final winding of a generator bar of a 355 MW hydroelectric plant was instrumented in the laboratory. The results show that it is possible to monitor the temperature over this region, which has a length of 45 cm. Therefore, the proposed method has the potential for the use of RDTS systems for temperature acquisition of small, medium, and large electrical machines.