Railway vibration – fast physics-based models for the prediction of ground vibration and the identification of track damage

Abstract

The following applications of machine learning/AI for railway vibration will be discussed: 1. The prediction of the wave propagation from a railway line (completely physics based for surface lines, for tunnel lines (partially) physics-based ML for surface lines). 2. The track behaviour for the emission of train-induced ground vibration (physics based for homogeneous soil, ML for layered soil). 3. Track damage detection and quantification from FRF and moving load response. 4. Bridge damage detection and localisation from modal analysis and moving load response. 5. The use of axle-box acceleration for the identification of track/sub-soil condition and bridge resonances. Prediction calculation of railway vibration usually needs time-consuming finite element, boundary element and wavenumber domain calculations. For a user-friendly prediction software, fast calculations are needed. Several time-consuming detailed calculations should be used to develop simpler and fast models. The dynamic stiffness of isolated or un-isolated railway tracks from detailed calculations with a continuous soil is approximated with the simpler Winkler soil. The vehicle-track resonance (P2 resonance) rules the effect of the mitigation measures, and it can also be used for the on-board monitoring of the track and sub-soil condition. For the identification of track damage such as gaps between sleepers, track slabs and layers, detailed models with a continuous soil have been updated to get the best fit to the measured frequency response functions from hammer tests and the deformation pattern from the moving load response. Whereas the track damage can be locally identified, this is more difficult for bridges where the modal analysis gives mainly global information. The influence lines of the inclination for statically passing vehicles (locomotive, truck, compaction ) have been used to localise bridge damage (stiffness variations). The on-board monitoring of rail bridges needs special conditions (regular trains with special speeds) to excite and measure the bridge resonance.