Abstract
In a radio loudspeaker telephone device (30) having a radio controller (18) which makes a radio transmitter (15, 17) transmit to a radio channel a dial signal representative of a destination subscriber telephone set, the radio controller produces a timing signal representative of a first time instant at which the radio controller receives a response signal through a radio receiver (16, 17) from the radio channel. The response signal indicates that the destination subscriber telephone set is not busy. A detecting circuit (33) produces a ring-back tone detection signal while the detecting circuit detects a ring-back tone signal which is received through the radio receiver from the radio channel and which indicates that the destination subscriber telephone set is called by the telephone device. A switch unit (32) usually connects a microphone (11) to the radio transmitter. A switch controller (34) makes the switch unit disconnect the radio receiver from the microphone a time duration from the first time instant of the timing signal up to a second time instant at which the ring-back tone detection signal disappears. First and second attenuating circuits may be connected between the microphone and the switch unit and between the radio receiver and the loudspeaker, respectively.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have