Abstract
AbstractPoly(acrylic acid–amidoxime) [P(AA–AO)] and poly(maleic acid–amidoxime) [P(MA–AO)] resins were prepared by the γ‐radiation‐induced copolymerization of acrylonitrile with acrylic acid and maleic acid, respectively. The obtained resins were amidoximated by reaction with hydroxylamine. The prepared resins were used for the removal of methyl violet (MV) dye from aqueous solutions. Batch adsorption studies were made by the measurement of the effects of pH, the amount of adsorbent, the contact time, and the adsorbate concentration. The adsorption isotherm of MV onto P(AA–AO) and P(MA–AO) was determined at 25°C with initial MV dye concentrations of 10–70 mg/L. The equilibrium data were analyzed with the Langmuir and Freundlich isotherm models. The equilibrium process was described well by the Langmuir isotherm model with maximum adsorption capacities of 398.4 and 396.8 mg/L for P(AA–AO) and P(MA–AO), respectively. The kinetics of adsorption of MV onto P(AA–AO) and P(MA–AO) are discussed. The pseudo‐second‐order kinetic model described the adsorption of MV onto P(AA–AO) and P(MA–AO) very well. © 2010 Wiley Periodicals, Inc. J Appl Polym Sci, 2011
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.