Radiation Response of AlGaN-Channel HEMTs

Abstract

We present heavy ion and proton data on AlGaN high-voltage HEMTs showing single event burnout (SEB), total ionizing dose, and displacement damage responses. These are the first such data for materials of this type. Two different designs of the epitaxial structure were tested for SEB. The default layout design showed burnout voltages that decreased rapidly with increasing LET, falling to about 25% of nominal breakdown voltage for ions with LET of about 34 MeV $\cdot $ cm2/mg for both structures. Samples of the device structure with lower AlN content were tested with varying gate–drain spacing and revealed an improved robustness to heavy ions, resulting in burnout voltages that did not decrease up to at least 33.9 MeV $\cdot $ cm2/mg. Failure analysis showed that there was consistently a point, location random, where gate and drain had been shorted. Oscilloscope traces of terminal voltages and currents during burnout events lend support to the hypothesis that burnout events begin with a heavy ion strike in the vulnerable region between gate and drain. This subsequently initiates a cascade of events resulting in damage that is largely manifested elsewhere in the device. This hypothesis also suggests a path for greatly improving the susceptibility to SEB as development of this technology goes forward. Testing with 2.5-MeV protons showed only minor changes in device characteristics.