Radial variations of broad-sense heritability in wood properties and classification of load\u2013deflection curves in static bending for six half-sib families of Chamaecyparis obtusa

Abstract

Wood properties (annual ring width, tracheid length, microfibril angle [MFA], basic density, and air-dry density) and mechanical properties (modulus of elasticity [MOE], modulus of rupture [MOR], bending work, and compressive strength) in 34-year-old Chamaecyparis obtusa trees of six half-sib families were measured from pith to bark to clarify radial variations in inheritance of these traits and the relationships between wood properties and mechanical properties. In addition, within-tree and among-family differences in the load–deflection curves were discussed. Radial variations of all wood properties were fitted to linear or nonlinear mixed-effects models with random effects of families. The MFA was correlated with MOE in all radial positions, whereas air-dry density correlated with all mechanical properties in mature wood. Radial variations in broad-sense heritability differed between wood properties. A relatively higher broad-sense heritability was recognized in almost all wood properties for mature wood. Based on the results, it was concluded that mechanical properties in mature wood can be effectively improved using MFA and air-dry density as criteria. In addition, the types of load–deflection curve in mature wood differed from those in juvenile wood, suggesting that not only elastic properties, but also plastic properties in C. obtusa are affected by genetic controls, especially in mature wood.