Abstract
The flow distribution and central processing unit (CPU) temperatures inside a rack of thirty 1 U (single rack unit) Sun Fire V20z servers retrofitted with direct-to-chip liquid cooling and two coolant pumping configuration scenarios (central and distributed) are investigated using the EPANET open source network flow software. The results revealed that the servers in the top of the rack and close to the cooling distribution unit can receive up 30% higher flow rate than the servers in the bottom of the rack, depending on the pumping scenario. This results in a variation in the CPU temperatures depending on the position in the rack. Optimization analysis is carried out and shows that increasing the flow distribution manifold’s dimensions can reduce the flow variation through the servers and increase the total coolant flow rate in the rack by roughly 10%. In addition, activating the small pumps in the direct-to-chip liquid cooling loops inside the servers (distributed pumping) resulted in an increase of 2 °C in the CPU temperatures at the high computational workload.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.