Abstract
Digital speckle pattern interferometry has been used to detect inhomogeneous heating in YBa2Cu3O7−δ coated conductors. The analysis was performed in a sample with a controlled defect, which causes a significant local reduction in the critical current value, Ic. The experiments, which were performed with the sample surrounded by nitrogen vapor, have shown that the location of the initial hot spot leading to the complete transition to the normal state of the conductor (quench) is strongly dependent on the sample cooling configuration. When the sample is mainly cooled by gas convection, the quench always starts in the low-Ic region, while for improved cooling configurations the initial hot spot does not always coincide with this region. The results have been compared with those obtained by direct electric field measurements along the sample in nitrogen vapor and liquid.
Sign-in/Register to access full text options 
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
