Abstract
Concrete cut-off walls are the main seepage control measures for the alluvial foundation of earthen dams. Its mechanical behaviour, which is affected by many factors, is complicated, in which foundation valley shape is one of the main factors. To analyse the influence of the foundation valley shape on the behaviour of the cut-off walls quantitatively, this study defines the foundation valley width coefficient μ, foundation valley steepness coefficient δ and foundation valley asymmetric coefficient γ. A series of numerical calculations on the cut-off wall behaviour with different foundation valley shape parameters was performed on the basis of a core earthen dam. The influence of the foundation valley shape was studied quantitatively by combining it with the numerical results and measured data of the case histories. The behaviour difference between ordinary concrete and plastic concrete cut-off walls was also discussed. Results indicate that the cut-off wall mainly experiences bending deformation. Large tensile stress occurs near the interface between the cut-off wall and the bedrock. The plastic concrete cut-off wall can effectively reduce the tensile stress. The foundation valley width affects the wall behaviour through the bedrock arching effect. μ = 1.5 can be used as the critical value to distinguish the wide and narrow valley foundation. When δ > 1.0, the cut-off wall is subjected to large tensile and shear stresses near the contact part of the wall and bedrock. The foundation valley asymmetry causes uneven deformation and large tensile stress on the cut-off wall near the steeper bank slope.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.