Abstract
Neutron dark-field imaging constitutes a seminal progress in the field of neutron imaging as it combines real space resolution capability with information provided by one of the most significant neutron scattering techniques, namely small angle scattering. The success of structural characterizations bridging the gap between macroscopic and microscopic features has been enabled by the introduction of grating interferometers so far. The induced interference pattern, a spatial beam modulation, allows for mapping of small-angle scattering signals and hence addressing microstructures beyond direct spatial resolution of the imaging system with high efficiency. However, to date the quantification in the small angle scattering regime is severely limited by the monochromatic approach. To overcome such drawback we here introduce an alternative and more flexible method of interferometric beam modulation utilizing a spin-echo technique. This novel method facilitates straightforward quantitative dark-field neutron imaging, i.e. the required quantitative microstructural characterization combined with real space image resolution. For the first time quantitative microstructural reciprocal space information from small angle neutron scattering becomes available together with macroscopic image information creating the potential to quantify several orders of magnitude in structure sizes simultaneously.
Highlights
Due to the image blur introduced by the geometry of the setup, especially by the relatively long sample to detector distance with respect to a conventional imaging experiment, the spatial resolution was in any case limited to about 1 mm
To achieve quantitative results the latter have to be corrected by the sample thickness and wavelength dependence of the total scattering, which leads to the results in column 3 of Fig. 3 for three areas of interest in the sample, namely the powder sample, a sample-free area and the PVC dispersion
The total scattering values deduced are in good agreement with the 12.4 wt.% concentration of the particles. From these seminal results which unambiguously prove the principle and potential of the method, we conclude that the presented method unlocks the access to an intermediate size range for structural investigations, and bridges an unprecedented size range between the macroscopic and microscopic scales, which is invaluable for the investigation of real systems and components as in contrast to homogeneous model samples of materials required for corresponding microscopic investigations otherwise
Summary
The resulting image data sets were analyzed in terms of the local modulation, in particular their local visibility For this purpose a cosine fitting routine has been developed, which is capable of shifting the area of interest, typically the width of one period for the shortest utilized wavelength (i.e. longest spatial period for a specific measurement) pixel by pixel over the full image. To achieve quantitative results the latter have to be corrected by the sample thickness and wavelength dependence of the total scattering, which leads to the results in column 3 of Fig. 3 for three areas of interest in the sample, namely the powder sample (top), a sample-free area (middle) and the PVC dispersion (bottom) These final curves show good agreement with the complimentary SESANS measurements and theory curves describing the structural features of 1 μ m and 136 nm for the metallic powder and the PS dispersion, respectively. The total scattering values deduced are in good agreement with the 12.4 wt.% concentration of the particles
Sign-in/Register to view highlights & summary Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
