Quantitative measurement of soot particle size distribution in premixed flames – The burner-stabilized stagnation flame approach

Abstract

A burner-stabilized, stagnation flame technique is introduced. In this technique, a previously developed sampling probe is combined with a water-cooled circular plate such that the combination simultaneously acts as a flow stagnation surface and soot sample probe for mobility particle sizing. The technique allows for a rigorous definition of the boundary conditions of the flame with probe intrusion and enables less ambiguous comparison between experiment and model. Tests on a 16.3% ethylene–23.7% oxygen–argon flame at atmospheric pressure show that with the boundary temperatures of the burner and stagnation surfaces accurately determined, the entire temperature field may be reproduced by pseudo one-dimensional stagnation reacting flow simulation using these temperature values as the input boundary conditions. Soot particle size distribution functions were determined for the burner-stabilized, stagnation flame at several burner-to-stagnation surface separations. It was found that the tubular probe developed earlier perturbs the flow and flame temperature in a way which is better described by a one-dimensional stagnation reacting flow than by a burner-stabilized flame free of probe intrusion.