Quantitative leak test for microholes and microtears in whole gloves and glove pieces

Abstract

The current leak tests for gloves are qualitative. The developed quantitative leak test uses vacuum pressure to draw measured volumes of water to detect microholes/tears in whole gloves and glove pieces. A modified plastic vacuum desiccator interfaced with a Frazier air permeability tester allowed exposure of disposable unsupported/unlined/powderless Kimtech Blue nitrile to 50 mL of water for glove pieces or to 600 mL within a whole glove at vacua of 8–9 in. (20–23 cm) and 11–12 in. (28–30 cm) water gauge, respectively. Punctures of known dimensions were made before testing in specific glove areas using 21-, 22-, 26-, 30-, and 33-gauge needles (outer/inner diameters in micrometres of 873/514, 794/413, 635/311, 476/127, 318/159 and 238/133, respectively). The length of the punctures varied from 0.13 ± 0.01 to 0.80 ± 0.11 mm. Flow rates of water through the holes/tears ranged from 2.5 ± 0.4 to 106 ± 7 mL/min for glove pieces. For whole gloves, the ranges were from 31 ± 9 to 543 ± 110 mL/min in the palm area; and 0.23 ± 0.06 to 82 ± 18 mL/min in the finger/fingertip area. The method quantified tear lengths as short as 0.13 ± 0.01 mm.