Abstract
Dental resin composites generally fail from small cracks. Large crack techniques are not representative of in vivo failures. Quantitative fractography relies on the observation of small “natural flaws”. This study investigates the effect of flaws that occur from fabrication and handling on the measurement of fracture toughness for four different direct resin composites. Microtensile dog-bone shaped specimens for each of four composites were fractured to measure the strength. In addition, we measured crack sizes of the fracture initiating cracks and determined the fracture toughness from these measurements using quantitative fractographic analysis on selected specimens. The characteristic strengths (28–51 MPa) and Weibull moduli (4.9–7.8) were also determined and related to the toughness values (0.5–0.9 MPa m1/2) obtained. The elastic moduli (5–10 GPa) were measured using an indentation technique that has not been used before for direct resin composites. The indentation technique offers an alternative method for small specimens. Quantitative fractographic analysis offers a useful technique to assess fracture toughness of resin composites from cracks of the same size as observed in practice. The toughness of the direct resin composites results from a balance between the size, number and shape of filler particles and the viscosity of the resin matrix.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callMore From: Journal of the Mechanical Behavior of Biomedical Materials
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
