Quantitative evaluation and influencing factors analysis of the brittleness of deep shale reservoir based on multiply rock mechanics experiments

Abstract

Due to a great increase in the plasticity of deep marine shale reservoirs in southern Sichuan under high-temperature and high-pressure conditions, the single brittleness evaluation method is difficult to effectively characterize its fracability, which significantly limits the selection of sweet spots and fracturing reconstruction in the area. In the case of the deep marine shale reservoir of the Wufeng-Longmaxi formations in the southern Sichuan Basin, through triaxial high-temperature and high-pressure experiments, fracture toughness and X-ray diffraction experiments, the mechanical properties and its influencing factors in the shale reservoir are studied, and the rock fracture morphology under various loading conditions is quantified. According to the morphological characteristics of shale, the analysis of influencing factors and comprehensive quantitative evaluation of the brittleness has been carried out. The deep marine shale resource in the southern Sichuan Basin is likely to be characterized by its high elastic modulus and low I fracture toughness. The mineral composition, temperature, pressure, and degree of bedding development are the primary factors for determining the brittleness; with high quartz mineral content (>50%), low confining pressure (<20 MPa), medium and low temperature (<60 °C) and high density of the shale bedding, the fractal dimension of the sample after the experiment is higher; whereas the geometry of cracks are mainly complex shear cracks, and brittleness is higher. The analytic hierarchy approach establishes a comprehensive evaluation index by analyzing the relationship between the normalized rock mechanical parameters, the stress–strain curve's brittleness index, and the fractal dimension. The brittleness of deep marine shale can be more accurately described by this evaluation index. The primary target layer for future shale gas exploitation, the 31 sublayer of the first member of the Longmaxi Formation, is shown to have a high brittleness index.