Quantitative determination of uric acid using paper-based biosensor modified with graphene oxide and 5-amino-1,3,4-thiadiazole-2-thiol.

Abstract

Uric acid is the primary end product of human purine metabolism and has been regarded as a key parameter in urine and blood for monitoring physiological conditions. This paper presents a paper-based biosensor for a quantitative determination of uric acid using electrochemical detection. The working electrode of the biosensor is modified with graphene oxide (GO) and 5-amino-1,3,4-thiadiazole-2-thiol (ATT) by electropolymerizing ATT on the surface of graphene oxide. In this study, cyclic voltammetry (CV) measurements required only 200 μL of analyte solution. The experimental results showed that the oxidation peak current increased as the concentration of uric acid become higher and exhibited a linear relationship in the concentration range of 0.1-10 mM, indicating that this proposed biosensor has high sensitivity. In addition, this biosensor has good selectivity to detect uric acid because ATT has a specific binding with it. In human blood and body fluids, nitrites may be the only factor that can interfere with the detection of uric acid using this proposed biosensor. Nevertheless, uric acid can be discriminated from nitrite in the CV measurement due to different oxidation potentials. Thus, this proposed paper-based biosensor is a promising tool for detecting uric acid in biological samples.