Quantitative Determination of Polyethylene Glycol Based upon Its Salting Out and Partitioning of a Dye into the Resulting Aqueous Two-Phase System

Abstract

A method is described that allows quantitative determination of polyethylene glycol (PEG) concentrations by spectrophotometric measurement of fluorescein dye absorbance after its partitioning into an aqueous two-phase system containing mPEG ( M r 5 kDa) in the upper phase and ammonium sulfate in the lower phase. The absorbance decrease of fluorescein in the lower phase is directly proportional to the mPEG concentration, with two proportionality constants equal to 4.42 × 10 5 and 2.84 × 10 5 M −1 cm −1 in the range of 0-0.4 and 0.4-1 μM, respectively. This experimental technique can be extended to PEGs of other molecular weights by means of calibration curves that give for each size of PEG the adequate proportionality constants. The results indicate that the quantitative determination is not affected by the presence of many substances such as proteins, reducing agents, and salts, at the usual concentrations.