Abstract
The presence of inorganic nitrogen species in water can be unsuitable for drinking and detrimental to the environment. In this study, a surface-enhanced Raman spectroscopy (SERS) method coupled with a commercially available gold nanosubstrate (a gold-coated silicon material) was evaluated for the detection of nitrate and nitrite in water and wastewater. Applications of SERS coupled with gold nanosubstrates resulted in an enhancement of Raman signals by a factor of ∼10(4) compared to that from Raman spectroscopy. The new method was able to detect nitrate with linear ranges of 1-10,000 mg NO3(-)/L (R(2)= 0.978) and 1-100 mg NO3(-)/L (R(2)= 0.919) for water and wastewater samples, respectively. Among the common anions, phosphate appeared to be the major interfering anion affecting nitrate measurement. Nevertheless, the percentage error of nitrate measurement in wastewater by the proposed SERS method was comparable to that by ion chromatography. The nitrate detection limits in water and wastewater samples were about 0.5 mg/L. The SERS method could simultaneously detect sulfate, which may serve as a reference standard in water. These results suggested that the SERS coupled with nanosubstrates is a promising method to determine nitrate concentrations in water and wastewater.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.